Join for Free  |  Login
Loading...
Changes Saved.
Error Occurred!
Back

Cannot connect to Photoshop in Windows

As your first point of action, please re-start your computer.

If the issue is still not resolved, and you can't connect to Photoshop or get the message "Failed to run Photoshop script" when running custom actions or high-res production then check these solutions.

Note: You need to have Photoshop version CS5 or newer to work with ProSelect. See the bottom of this article for the latest information about CS6 and CC installations.

Checking if ProSelect can connect to Photoshop

If you are not sure whether ProSelect is having a problem connecting to Photoshop then you can do the following:

In ProSelect 2016r1 and newer:

Use the Test Photoshop Connection button in ProSelect's Preferences -> General Settings -> General -> Photo Editor.

This will attempt to send a command and get a response from the version of Photoshop what you have selected in the dropdown menu (see section below "Selecting which version of Photoshop to use" for more about this). If Photoshop is not already running it will launch it. If the connection is working, the version number of Photoshop that ProSelect successfully connected to will be shown.

In this case, you should be able to use commands (Ctrl-T) to like Open Original file in Photoshop. If the problem ONLY occurs when running Hi-Res Production, then you should check the Debugging Production Problems article.

If the above test does not work as described then check the solutions in the sections below.

In ProSelect 2015r3 and earlier:

Open ProSelect's Preferences (under the Edit Menu) and go to Image Effects -> Custom Effects Actions.

Then click the Reload button below the Photoshop's Actions list on the right side of the window. This will launch Photoshop if it is not already running. It will then get Photoshop to send it the names of all of its current actions.

This should only take a few seconds after Photoshop has started.  When complete, you should see the action list updated AND the version of Photoshop and the current date shown next to the Reload button and it means that ProSelect is successfully able to communicate with Photoshop.

In this case, you should be able to use command (Ctrl-T) to Open Original file in Photoshop. If the problem ONLY occurs when running Hi-Res Production, then you should check the Debugging Production Problems article. 

If the above test does not work as described then check the solutions in the sections below.

Make sure Photoshop is not waiting for user input

Switch over to Photoshop and make sure that Photoshop is not displaying any Dialog boxes or windows . These may occur be for a number of reasons including an error while starting Photoshop, activation, registration, new update message or its Welcome window (see below). When these messages are being displayed, generally Photoshop will ignore any commands coming from ProSelect and ProSelect will be left waiting for a response.

If you have been recently using Photoshop, make sure that you haven't left it waiting for confirmation to complete a text edit, transform operation etc. This is easy to miss (particularly with C6 and newer with black backgrounds). You should NOT see the buttons below at the top of the screen - if you do click one button or the other to clear this state. Photoshop will not respond to external commands while these buttons are shown.

 

Getting rid of the Welcome window in CC 2014 on startup

You can only stop the Welcome window from being shown when Photoshop starts if you are using a registered version of Photoshop CC2014 (not the trial version). To do this click on the What's New tab in the window then scroll all the way down to the bottom. There's a check box "Don't Show Welcome Screen Again".

Getting rid of the Start Workspace window in CC 2015 on startup

This window is shown, by default, over the top of your work area when opening CC 2015 and will prevent ProSelect from sending commands to Photoshop. To prevent this open Photoshop's Preferences, select the General section on the left and uncheck the boxes next to both:

Show "Start" Workspace When No Documents Are Open
Show "Recent Files" Workspace when Opening a File

The close and re-open CC 2015 to verify that this screen is no longer shown.

Windows 10 Issues

One user reported that he needed to "Run ProSelect as Admin" on Windows 10 in order to successfully connect to Photoshop. This may have been due to his particular security settings but it did provide a solution.

He also reported that running ProSelect in "Windows 7 compatibility mode" prevented ProSelect from connecting to Photoshop (even when running as admin). 

Multiple copies of Photoshop Installed

When you install a new version of Photoshop it is recommended that you un-install any other versions first. In particular, this applies when upgrading between Photoshop CC versions since the new version of Photoshop does not automatically replace the earlier version, rather, you end up with both the old and new versions installed.

When you install a new version, the Photoshop installer should update the registry entries that ProSelect uses to locate it. However, sometimes this does not get completed correctly.

In this case, the best option is to uninstall all copies of Photoshop then just re-installing the latest version should fix this. Alternatively, you can manually adjust the registry entries yourself (see next section).

This also applies to installing both the 32 and 64 bit versions of Photoshop. It is recommended that you only install the 32 bit version or the 64bit version, but not both, to avoid registry entry problems. (See section below about 32 bit vs 64 bit versions).

If you need to have more that one version of Photoshop installed see the next section.

Selecting which version of Photoshop to use (ProSelect 2015r2 and newer)

Because many users who have a Photoshop subscription (CC or newer) are also keeping a copy of one or more earlier versions of Photoshop on their computers, ProSelect 2015r2 now looks through Windows registry entries and creates a list of the versions of Photoshop that you have currently installed on your computer. In the Preferences -> General Settings -> General -> Photo Editor, you can then select the version of Photoshop to use.

By default, this is the latest version as determined Window’s current Registry entry setting for “Photoshop.Application”.  However, you can also select a specific version of Photoshop from the dropdown menu.

Not a Perfect Solution

This solution works well provided you do not have a different version of Photoshop already running to that which you have selected in the Preferences. If you have selected "Default (from Registry)" then this is usually the same as selecting the most recently installed version of Photoshop on your computer (because the Photoshop installer will set that version to be the default version to use). 

If you do have a different version running, then ProSelect will try to launch the selected version but Photoshop itself will cancel the launch because another version of Photoshop is already running. As a result, the command from ProSelect will stall until it times out (after about 30 seconds) and you will get a  "Failed to run Photoshop script" message. 

If selecting the version of Photoshop to be used in ProSelect does not work as expected, then likely your computer's registry entries for Photoshop are incorrectly setup (this has been reported for some CS6 and CC installations by a few users). In this case, you will need to follow the instructions detailed below to manually adjust your registry entries. When completed,you should set the Preferences to "Use Photoshop Version: Default (from Registry)".

Checking that the Registry Entry for Photoshop is correct

ProSelect connects to Photoshop by calling the OLEObject in the Windows Registry called "Photoshop.Application".

When you install Photoshop, this value is set to point to the latest installation of Photoshop however, this setting can get confused when upgrading Photoshop versions or if you have multiple copies of Photoshop installed on your computer.

For ProSelect to be able to connect to Photoshop the CLSID registry setting for "Photoshop.Application" must point to a valid copy of Photoshop.

The Registry will usually also have a specific entry for each version of Photoshop that you are running as follows:

CS4 has a registry entry called "Photoshop.Application.11"

CS5 has a registry entry called "Photoshop.Application.12"  

CS6 has a registry entry called "Photoshop.Application.60" (See section below about 32 bit vs 64 bit versions)

CC has a registry entry called "Photoshop.Application.70" (See section below about 32 bit vs 64 bit versions)

CC 2014 has a registry entry called "Photoshop.Application.80"

CC 2015 has a registry entry called "Photoshop.Application.90"

CC 2015.5 has a registry entry called "Photoshop.Application.100"

CC 2017 has a registry entry called "Photoshop.Application.110"

In Summary...

As an example, if you have Photoshop CC 2014 installed then you need to make sure that the CLSID for Photoshop CC2014 ("Photoshop.Application.80" as listed above) is the same as the CSLID for the default Photoshop application ("Photoshop.Application"). 

To do this you need to open and use the Windows Registry Editor as described in the next section.

If you do not want to make this registry change then you should uninstall all copies of Photoshop on your computer and then only re-install the latest version of Photoshop that you have. This will normally fix any registry problems.

Problems after using Glary Utilities

One user reported that the "Registry Repair" function in this software removed all the Photoshop CLSID folders from the Registry preventing ProSelect from connecting to Photoshop. Fortunately, he had a backup copy of the Registry before the cleanup. After restoring the Registry from this backup everything worked again!

Using the Registry Editor

If not done correctly, editing the registry can stop your computer from working! If you are not sure what you are doing then get an expert to help you.

1. Run Registry Editor program. 

On XP, click Start, Run and type "regedit" in the Open box and click OK.
On Vista or Windows 7, click on the Start Orb (Button), click in the Start Search Dialog Box, type "regedit", press enter


2. Click on the HKEY_CLASSES_ROOT folder to see the contents.

3. Scroll down until you see "Photoshop.Application" and open that folder.

4. Click on the CLSID folder and make a note of the value under the Data heading in the right-hand pane as shown above.

 

5. Now scroll down the left-hand list until you see the registry entry for the version of Photoshop that you wish ProSelect to work with.  As mentioned in the previous section CC 2014 would be "Photoshop.Application.80".  Important: You should only choose a version of Photoshop that you know is installed AND working on your computer as there may be registry entries still left over from previously installed versions of Photoshop.

6. Click on the CLSID folder and check the value under the Data heading on the right-hand pane. 

The number shown should be the same as the number from step 4 above. If it is not, then follow the steps below.

7. Double click on the icon under "name" in the right-hand panel to open the "Edit String" dialog. Select and copy (using Control-C) the ID number in the Value Data box.

8. Click Cancel to close the box.

9. Scroll back to the "Photoshop.Application" and open that folder (same as step 4)

10. Double click on the icon under "name" in the right-hand panel to open the "Edit String" dialog.

11. Select the ID number and use paste (using Control-V) to replace the number in the Value data box

12. Click OK to save the value and close the box.

13. Close the Registry Editor program.

Using 32bit or 64bit versions of Photoshop

Versions of Photoshop from CS6 onwards allow you to install either the 32bit version or the 64bit version of the software.

With CS6:  It is recommended that you do not install both 32bit and 64bit versions of the same version of Photoshop at the same time, otherwise, you can't predict which version ProSelect will use. If you have done this then you will need to un-install both versions and then re-install the one that you wish to use or get an expert to poke around in your registry entries further!

Note: One user who had both the 32bit and 64bit version of Photoshop CS6 installed, has reported that if you launch the 64bit version of Photoshop before you try to connect to it from ProSelect then ProSelect will successfully connect to the 64bit version.

With CC: Unfortunately, it appears that you have no choice other than to have both 32 and 64 bit versions of Photoshop installed. The CC installer also sets up the Windows Registry Redirector so that the 32bit of Photoshop is always used when the called from a 32 bit application (which ProSelect currently is).  The redirector is controlled from this registry key:

HKEY_LOCAL_MACHINESOFTWAREWow6432NodeClassesCLSID{Class id for Photoshop CC}

where {Class id for Photoshop CC} is the number setup in Photoshop.Application (which should be the same as used in registry entry Photoshop.Application.70)

It is possible to delete this key and the 64bit version seems to run when invoked from ProSelect, however, this change this MAY effect other applications that connect to Photoshop so you should backup your registry so it can be restored in the event of other problems occurring.  At this point in time, without this registry change,  you will need to only use the 32bit version of Photoshop with ProSelect.

With CC 2014, CC2015:  It appears that these versions automatically installs either the 32bit or 64bit version depending on whether your version of Windows is 32bit or 64 bit. So if you are running Windows 7 (64bit) then Photoshop CC 2014 x64 will be installed. You can check this by looking at the version number in the About Photoshop window. In this case, ProSelect will run the installed version assuming that the Registry entries are correct. 

Following a recent report from a user, it appears that when you install CC 2014, CC is not removed and the resulting registry entries that ProSelect uses may not be correctly updated to point to CC 2014 instead of CC

In order to allow ProSelect to connect to CC 2014, the solution was to:

  1. Uninstall CC
  2. Uninstall CC 2014
  3. Re-install CC 2014

It is likely that this last operation correctly updated the registry entries. Otherwise, you can manually check and, if necessary, update the registry entries using the method described above.  The same solution may be useful (we have not checked this) if you have problems installing the CC 2015 version after CC.

Checking that Photoshop can still run script files

In most cases, ProSelect communicates with Photoshop by telling it to run a script file. Sometimes, a fault in Photoshop can prevent it from running these files at all. To check this:

  1. Download our test_photoshop_script.zip file.
  2. Unzip the file on your desktop. The unzipped file is called "test_photoshop_script.jsx".
  3. Open Photoshop and choose Scripts -> Browse (under the File menu)
  4. Navigate to your desktop and select the above .jsx file
  5. You should then see the message box shown below

If this you don't see the above message, then you definitely have a problem with your Photoshop installation. (Also see "Using Photoshop CC 2017" below). You could try uninstalling and re-installing Photoshop. If these tests still do not work, then we recommend that you contact Adobe for support.

Un-install and Re-install Photoshop

After trying all the above options without success, we suggest that you uninstalling and re-installing Photoshop.

Using Third Party Plugins

It is possible that third-party plug-ins may cause issues with the connection to Photoshop so we have included this information on testing Photoshop with plugins disabled below.

To disable Photoshop plug-ins, start Photoshop with Shift key and click the "Yes" button when it says "Skip loading optional and third-party plugins?". Then test the ProSelect connection to Photoshop again. If it now works, you may need to remove one or more third-party plug-ins or contact Adobe for support.  This Adobe article may help: Photoshop plug-ins troubleshooting.




Related Articles